تماس فوری
construction of cold storage in Tehran; A comprehensive guide to design, implementation and price inquiry
Tehran, as the economic and commercial hub of Iran, is the main distribution center for food, medicine and industrial products. Due to the high volume of goods exchange in this metropolis, the need for standard refrigeration infrastructure is felt more than ever. Building a cold store in Tehran is not only a logistical need, but also a strategic investment to maintain product quality and reduce waste.
In this article, we will examine all aspects of the design, installation and implementation of cold storage in Tehran and we will explain the role of Sefidsarma Refrigeration Group in this specialized process.
The importance of building a standard cold store in Tehran metropolis
Quick access to the consumer market, reduction of transportation costs and strict control of the supply chain are among the most important reasons for the desire of businesses to build a cold storage facility in the suburbs and inside the city of Tehran (such as the industrial areas of Special Road, Shoorabad, Shamsabad, and Khavaran). A standard cold store should be able to have a stable temperature and high efficiency in Tehran's climate.
Applicable types of cold storage in Tehran
Depending on the type of product and business needs, cold storage construction is divided into different categories:
1. Above Zero cold storage
Suitable for storing fruits, vegetables, fresh dairy products and medicine. The temperature in these cold stores is usually set between +1 and +4 degrees Celsius.
2. Below Zero cold storage
For long-term storage of meat, chicken, fish and frozen products. The standard temperature of these units is usually -18 to -25 degrees Celsius.
3. Double-circuit cold storage
This type of cold storage has the ability to change its use from above zero to below zero, which is very widely used by general storekeepers in Tehran.
4. Blast Freezer
For quick freezing of products in the shortest possible time (temperature -35 to -40 degrees) in order to preserve the texture and quality of the food.
The steps of designing and building a cold store in Tehran by Sefidsarma
Executing a successful refrigeration project requires the following engineering steps:
First step: consultation and needs assessment
The experts of Safidsarma suggest the best dimensions and capacity by carefully examining the type of product, the volume of incoming and outgoing goods and the available space.
Second step: cooling load calculations
At this stage, the amount of energy loss, the ambient temperature of Tehran and the thermal load of the products are calculated so that the power of the compressor and evaporator can be selected precisely.
Third step: Substructure and insulation (sandwich panel)
Using polyurethane sandwich panels with appropriate thickness (usually 10 to 15 cm) is vital to prevent energy loss.
Fourth step: Installation of mechanical and electronic equipment
Installation of condensing unit, evaporator, smart switchboard and temperature and humidity control systems. Key parts in the construction of cold storage
In Safidsarma projects, the highest quality parts are used to guarantee the longevity of the system:
- Compressor: The heart of the refrigerator, which is responsible for circulating the refrigerant.
- Evaporator: The internal unit that absorbs heat from the environment of the refrigerator.
- Condenser: The external unit that rejects the absorbed heat to the outside environment.
- Electrical board: Intelligent temperature monitoring and control system.
Why should we choose "Sefid Sarma Refrigeration" for the construction of cold storage in Tehran?
Choosing a reliable contractor in Tehran is very important. Safidsarma, with years of experience in the refrigeration industry, offers the following benefits to customers:
- Specialized engineering design: Accurate calculations to optimize energy consumption.
- Direct supply of equipment: Eliminating intermediaries and offering competitive prices.
- Professional installation team: Implementation of projects in the shortest possible time with current standards.
- Warranty and after-sales service: Fast technical support in all areas of Tehran and Suburbs.
- Free consultation: Providing economic solutions that fit your budget.
Construction of a cold storage in Tehran is a complex process where mistakes in the smallest details can lead to heavy financial losses and spoiled products. By entrusting your project to Sefidsarma Refrigeration Group, ensure the quality of execution and stability of your refrigeration system.
To receive a free consultation and to inquire about the exact price of cold storage in Tehran, contact our experts today.
Cold storage design in Tehran by Sefidsarma; From engineering calculations to executive plan
The foundation and basis of a stable refrigeration system is its basic design and engineering. If the design of the cold storage is done without accurate calculations of thermal load and climatic conditions, even the use of the most expensive equipment cannot create the desired efficiency; The result of this will be astronomical electricity consumption, severe wear and tear of parts, and continuous failure of products.
The design of cold storage in Tehran by Sefidsarma with the use of experienced engineers and modern software, guarantees maximum efficiency and optimization of the construction costs of your cold storage.
The importance of special cold storage design in Tehran
Tehran metropolis has different refrigeration needs due to the wide variety of industries (from pharmaceuticals and food industries to fruit and protein storage). In addition, the weather conditions of Tehran are hot and dry in summers and cold in winters.
In the process of designing a cold store in Tehran by Sefidsarma, the following are considered as main variables:
- Tehran's dry and wet bubble temperature in the hottest days of the year for the accurate selection of the condenser.
- Electrical voltage fluctuations in industrial areas of Tehran (such as Shamsabad, Shoorabad and Special Road).
- Space limitations in Tehran's urban businesses (such as restaurants and hypermarkets).
Engineering stages of cold storage design in Sefidsarma
Sefidsarma Refrigeration Group advances the design process in 4 main and completely scientific phases:
1. Analysis of client needs and product specifications
The type of product (meat, dairy, medicine, fruit or vegetables) determines the temperature, relative humidity and speed of air circulation in the cold room. For example, the design of the cold storage for bananas is structurally different from the cold storage for frozen meat.
2. Accurate calculations of cooling load (Heat Load Calculations)
Sefidsarma engineering team calculates the following thermal loads using specialized software:
- Infiltration load: heat transfer from the walls, ceiling and floor (according to the thickness of the sandwich panel).
- Product load: the heat that the product itself has when it enters the cold storage to reach the desired temperature.
- Respiratory load: for fresh fruits and vegetables.
- Equipment and people load: heat caused by the operation of fans, lighting and traffic Personnel.
3. Equipment Matching
After the total cooling load is obtained, the corresponding parts are selected:
- Compressor: suitable for the temperature of the evaporator and condenser (choose from well-known brands such as Bitzer or Copeland).
- Evaporator: with proper fin distance to prevent rapid frosting.
- Condenser: suitable for the maximum temperature of Tehran summer to ensure complete distillation of the refrigerant.
- Expansion valve and liquid line equipment: from brands A reliable one such as Danfoss or Castel.
4. Layout and electrical map design
Copper piping route design, condensate placement
Advantages of cold storage design by Sefidsarma Refrigeration Group
Why do Tehrani employers entrust their projects to Sefidsarma engineering department?
- Reduce energy consumption up to 30%: optimizing the dimensions of parts and insulation prevents the continuous operation of the compressor and waste of electricity.
- Prevention of product weight loss: accurate design of humidity and air flow speed prevents drying and weight loss of sensitive products (such as meat and fruit).
- Optimum selection of piping: design of piping routes It is possible that the lowest pressure drop is created and the compressor oil returns to the crankcase properly.
- Presentation of 3D and 2D maps: Before starting construction, the client will have a complete view of how the equipment is arranged.
Expert advice and cold storage design request
If you are looking to build a safe, low-consumption and standard refrigeration unit in Tehran or its surrounding industrial towns, take the first step firmly. Engineering design is the key to the longevity of your cold storage.
To get more information, send architectural drawings and register a cold storage design request in Tehran, please contact Sefidsarma technical department. Outdoor unit, slope of pipes to return oil to the compressor, and design a scaled map of the smart switchboard.
